Mosin Nagant parts wanted

[AdamLee]

Looking for parts to reconfigure my 1929 Tula ex-Dragoon back to "look-alike" status.
1. Konovalov sight base and leaf assembly - entire unit tapped off any M91, can be Finn strike-through, weak finish, functional condition
2. M91 front barleycorn sight blade - Russian style, not a Finn double-stack
3. pair of solid barrel bands
4. fair/good condition M91/30 pre-war or wartime stock WITHOUT band removal cutouts; can be Finn-captured M91/30 stock without cutouts
5. fair/good condition M91/30 pre-war or wartime handguard


Looking for spare parts for another Mosin Nagant project.
1. bent bolt body (handle only) - don't care about markings or metal finish - just that it works
2. good take-off M91 barrel, don't care about metal finish - just good bore - complete with front barleycorn and rear Konovalov sights - Russian or Finn is fine

If interested I can trade 7.62x54r and 7.92mm ammo, as well as pay cash.

Not in any hurry, just wanted to get some gears turning out there!

Thanks, guys.

Adam

[OakRidgeStars]

Here's a good source for Mosin parts & stuff...

https://www.buymilsurp.com/

[Tazguy04]

Here is another good link for parts.

http://www.gunpartscorp.com/catalog/Mod ... ?catid=323

[AdamLee]

Here's a good source for Mosin parts & stuff...

https://www.buymilsurp.com/

thanks, man - I bookmarked it some time ago - so I took another look!

Adam

[AdamLee]

Here is another good link for parts.

http://www.gunpartscorp.com/catalog/Mod ... ?catid=323

thanks, man - I've got the Numrich site down - I took another look!

Adam

[Tazguy04]

I haave the stock from a 1939 91/30 that is just sitting in the parts room if you interested.

[AdamLee]

I haave the stock from a 1939 91/30 that is just sitting in the parts room if you interested.

Kevin, check your PM folder. Sent you a note.

thanks
Adam

[Tazguy04]

PM returned sir

[Tazguy04]

Message sent

[AdamLee]

Message sent

right back at ya! check your PM's

Adam

[AdamLee]

I have the stock from a 1939 91/30 that is just sitting in the parts room if you interested.

Kevin, did the stock turn out to be a postwar Ukrainian rearsenal after all?

If it had the rear band removal cuts, and pressed-in sling escutcheons, it was probably postwar.

If it had screwed-in sling escutcheons and no band cuts, it is what I'm looking for.

Thanks for checking!

Adam

[Tazguy04]

It turned out to be post war, with the press in sling escutcheons, I'm sorry I didnt have the stock you were looking for, I am willing to give you the sling and bayonet and I also found one on the barrel bands, as I stated before I'm not gonna ever use them so if you want them they are yours. Just let me know.

Kevin