Virginia Gun Owners Forum - VGOF

All,

Need some "old-head" wisdom here....

The SIG went into shop for some work (night-sights) the gent stated that SIG's are "wet-guns" and really love lubricant; stated that I was doing a good job keeping it clean, but needed more oil on the frame and slide. I "Will-Co" and marched on; but did notice that after OC'g all weekend (did some runs around local park, deep woods with dog in tow), that the nylon holster was a little "shiny" from the additional oil. Then on removal of SIG at end of day, that the slide was slightly dull colored. Using Hoppe's kit to clean/lub; to include Hoppe's silicone buff rag.

Am I doing anything wrong.. need to do more/less, etc....?

http://www.sigsauer.com/CustomerService ... uides.aspx Here is the Factory Sig Video on how to lubricate it.. No big issue in my mind if you have to wipe it down,After some time you will figure out how much oil to use and keep the stuff where it belongs,

Sigs are wet guns and need to have a good amount of lubrication. Just remember after cleaning to work the action repeatedly and wipe the extra oil down with a silocon cloth.

Yes, Sigs like to run wet. But if you're OC your Sig, then it will get dirty a lot quicker, so you'll be at a minimum wiping it down more frequently.

Also, get a good gun grease and put a little on the frame slide rails. Rack it a few times and wipe off the excess.

My 239 and 230 run very smoothly, and there is hardly any wear visable on the slide rails.

VBshooter, ProShooter and Gregj - THANKs for the information, the videos are very informative. Will be home in a few, will get the SIG lubed up and then headed to NRA-HQ Range for some practice. Appreciate the prompt responses; just wanted to make sure that I was doing the correct maintenance schedule/tasks .

I recommend slide glide. Several places are selling it now, I think I got it from Brian Enos's website. I use the lite in Winter and #1 in Summer. Just a very little works very well. I carry a 239, and as said before, apply grease, rack several times, and wipe up residue.

I use it on all my guns now. Where do I apply it, anywhere that is shiny at all, and rails etc.

I use Miltcomm T25 grease on my Sig (Sample came with gun, liked it, bought more.) I put it on with a brush, just thick enough to leave a shine, barely any white showing. I've shot 600 rounds in a weekend and still the gun runs fine and rails still have a sheen. Carry every day and no run off. The dullness on the slide is just a result of the holster. Better a dull gun with you than a shiny one at home. A quick rub with finger removes the dullness.

+1 on SIGs being wet guns. Takes a few tries to figure out how much is too much but Qtips are your friend. More lube = more cleaning but thats a fair tradeoff IMO.

I used to put Hoppes 9 everywhere but a local SIG nut turned me on to Milcomm TW25B grease on rails/barrels/guide rods and Milcomm MC2500 everywhere else. They all function just fine either way. Best thing about grease is that it doesnt migrate around like oil does. When I only used Hoppes 9 I had to flip 'em over in the safe once a week and always keep a paper towel underneath

Anyone else use white lithium grease on their guns? That and silicone on the outside when the cleaning and oil/greasing is done?