Re: Getting to 100,000 - faster
Posted: Sun, 21 Aug 2011 17:20:28
Taurus 809
Virginia Gun Owners Forum - VGOF
Freedom Isn't Free - Buy a Gun.
https://vagunforum.net:443/phpbb/
Getting to 100,000 - faster
Page 46 of 77
Re: Getting to 100,000 - faster
Posted: Sun, 21 Aug 2011 18:49:07
Re: Getting to 100,000 - faster
Posted: Sun, 21 Aug 2011 18:59:41
Re: Getting to 100,000 - faster
Posted: Sun, 21 Aug 2011 19:25:58
Re: Getting to 100,000 - faster
Posted: Sun, 21 Aug 2011 19:33:03
Re: Getting to 100,000 - faster
Posted: Sun, 21 Aug 2011 19:57:50
Okay look guys If I loose I have to buy one and the wife gets a new Car, now that is almost fair. But if I win it, She don't get the car and that is fairer to me I think it is, Well it sounds better in my head.
Re: Getting to 100,000 - faster
Posted: Sun, 21 Aug 2011 20:06:16
Oh Tech tip for all you Mauser buyers and owners.
I have read in several places that to mount a scope you must"remove' the pin that holds the rear sight in place.
Fact: No Mauser was ever made with a steel pin to hold the rear sights in place. The sight has two casting pins, one per side about 3-4 mm long. They fit into a machined channel in the mount. With a spring steel pressure leaf holding it tight into the mount.
To remove it, press firmly down with a screw driver blade in the v, at the front of the slide sight towards the front sight and then tap it towards the bolt. It should pop right out. Be careful not to bend the spring steel platen.
I have read in several places that to mount a scope you must"remove' the pin that holds the rear sight in place.
Fact: No Mauser was ever made with a steel pin to hold the rear sights in place. The sight has two casting pins, one per side about 3-4 mm long. They fit into a machined channel in the mount. With a spring steel pressure leaf holding it tight into the mount.
To remove it, press firmly down with a screw driver blade in the v, at the front of the slide sight towards the front sight and then tap it towards the bolt. It should pop right out. Be careful not to bend the spring steel platen.
Re: Getting to 100,000 - faster
Posted: Sun, 21 Aug 2011 23:25:03
Re: Getting to 100,000 - faster
Posted: Sun, 21 Aug 2011 23:35:16
Re: Getting to 100,000 - faster
Posted: Sun, 21 Aug 2011 23:40:15
Re: Getting to 100,000 - faster
Posted: Sun, 21 Aug 2011 23:49:00
Koenigsegg CCR EVO 817
Re: Getting to 100,000 - faster
Posted: Mon, 22 Aug 2011 04:12:53
Looks like mine...mk4 wrote:Koenigsegg CCR EVO 817
Re: Getting to 100,000 - faster
Posted: Mon, 22 Aug 2011 07:05:05
Re: Getting to 100,000 - faster
Posted: Mon, 22 Aug 2011 08:01:49
Re: Getting to 100,000 - faster
Posted: Mon, 22 Aug 2011 10:14:19
Re: Getting to 100,000 - faster
Posted: Mon, 22 Aug 2011 10:55:49
Re: Getting to 100,000 - faster
Posted: Mon, 22 Aug 2011 11:03:55
*snicker*mikalthekrout wrote:Okay look guys If I loose I have to buy one and the wife gets a new Car, now that is almost fair. But if I win it, She don't get the car and that is fairer to me I think it is, Well it sounds better in my head.
Re: Getting to 100,000 - faster
Posted: Mon, 22 Aug 2011 11:07:03
Re: Getting to 100,000 - faster
Posted: Mon, 22 Aug 2011 11:08:34
Re: Getting to 100,000 - faster
Posted: Mon, 22 Aug 2011 14:22:22
- lst823_new.jpg (16.9 KiB) Viewed 1744 times